330 µF bulk decoupling for a 6.3 V rail
The TPSD337M006R0100: That ESR figure is the one that matters for ripple handling — lower ESR means less self-heating and better filtering on a switching regulator output.
Swaps on site with standard rework gear
The molded body has clear polarity marking — a band on the positive end — so you can orient it right the first time even without a magnifier. No lab bench needed; hot-air or soldering iron rework is straightforward. Surface-mount package on tape and reel or cut tape. The ±20% tolerance is standard for this class; if your rail needs tighter than that, plan for a voltage derating or a screening step at incoming inspection.
No pin-compatible alternative in the same series is documented as a direct replacement, so this order code is the one to specify.