Skip to main content
KYOCERA AVX TPSD227K010S0150 — Specialty Capacitors

TPSD227K010S0150 KYOCERA AVX 220 µF 10 V Molded Tantalum

MPNTPSD227K010S0150
Active

KYOCERA AVX TPS series, Type Molded, 220 µF ±10%, 10 V rated, 150 mOhm ESR, 2917 (7343 Metric) surface-mount package, -55°C to 125°C operating range.

$1.6400Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSD227K010S0150 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR150mOhm
Voltage - rated10 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.287\" L x 0.169\" W (7.30mm x 4.30mm)
Height - seated0.122\" (3.10mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance220 µF
Case2917 (7343 Metric)
Manufacturer size codeD

Product details

The TPSD227K010S0150: This is a 220 µF, 10 V molded tantalum capacitor from the KYOCERA AVX TPS series, in a 2917 (7343 Metric) package. The 150 mOhm ESR is the number that sets the ripple current rating and the self-heating under load — for a 10 V rail with 100 mV ripple, the ESR limits the AC current to about 660 mA RMS before the internal temperature rise cuts into the 125°C ceiling.

The TPS series is a broad molded-tantalum family; if this exact order code is on allocation, a sibling with the same 220 µF, 10 V, D case but different ESR (e.g., the TPSD227K010R0100 at 100 mOhm) is a drop-in replacement on the same footprint.

2917 footprint — board-level fit

Standard 2917 (7343 Metric) case: 7.30 mm x 4.30 mm, seated height 3.10 mm max. The D-size code means the same land pattern as the rest of the TPS D-case family — no layout change if you swap ESR grades.

Frequently asked questions

Where can I buy TPSD227K010S0150 and check current pricing?

This part is sourced to order through independent distribution. No stock-holding claim is made here.

Is TPSD227K010S0150 a direct replacement for a failed 220 µF 10 V tantalum capacitor?

If the failed cap is also a 2917 (7343 Metric) molded tantalum with a 10 V rating, yes — the footprint and voltage match. Check the ESR of the original: if it was higher than 150 mOhm, this part will run cooler; if it was lower, verify the ripple current in your circuit doesn't exceed the rating of this 150 mOhm grade.