Skip to main content
KYOCERA AVX TPSC336K010T0500 — Specialty Capacitors

TPSC336K010T0500 KYOCERA AVX TPS Series 33 µF 10 V Molded

MPNTPSC336K010T0500
Active

KYOCERA AVX TPS series, 33 µF, 10 V, ±10% tolerance, Molded tantalum, 500 mOhm ESR at 100 kHz, size code C, -55°C to 125°C.

$0.2741Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSC336K010T0500 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR500mOhm @ 100kHz
Voltage - rated10 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.236\" L x 0.126\" W (6.00mm x 3.20mm)
Height - seated0.110\" (2.80mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance33 µF
Case2312 (6032 Metric)
Manufacturer size codeC

Product details

33 µF at 10 V — the ESR is the real spec

A 33 µF cap with 500 mOhm ESR can handle roughly 400 mA ripple at 100 kHz before the internal temperature rise hits the datasheet limit; above that, the ESR dominates the thermal budget.

Molded case, size code C — what it means at the bench

Package is 2312 (6032 metric), 6.00 mm x 3.20 mm footprint, seated height 2.80 mm max. Size code C is the standard case for 33 µF at 10 V in the TPS family. The molded case reworks cleanly — hot air at 260°C for 10 seconds lifts the part without lifting the pad, provided the board has a thermal relief on the cathode pad.

Active production — no LTB worry

Product status is Active per KYOCERA AVX. This BOM line can be ordered without obsolescence risk for current production.

The 125°C ceiling is the upper limit for the tantalum dielectric; derate voltage above 85°C per the standard tantalum derating curve.

Frequently asked questions

Is TPSC336K010T0500 the same as the AVX TPS series 33 µF 10 V?

Yes. TPSC336K010T0500 is the full order code for a 33 µF, 10 V, ±10% tolerance molded tantalum from the AVX TPS series, size code C. The TPS series is a general-purpose line; this specific code carries a 500 mOhm ESR at 100 kHz.

Can I use a 16 V capacitor instead of TPSC336K010T0500?

A 16 V rated part can be substituted if the footprint and ESR match, but the capacitance and case size may differ. For a 33 µF, 10 V application, a 16 V cap in the same case (size C) will have a higher voltage margin but the same ESR profile. Confirm the ESR and ripple current rating before swapping — the 500 mOhm ESR at 100 kHz is the limiting factor for thermal performance, not the voltage rating.