Skip to main content
KYOCERA AVX TPSC156M020R0450 — Specialty Capacitors

TPSC156M020R0450 15 µF 20 V Tantalum Cap, 450 mOhm ESR

MPNTPSC156M020R0450
Active

KYOCERA AVX TPS series, Molded tantalum capacitor, 15 µF ±20%, 20 V rated, 450 mOhm ESR, -55 to 125 °C, 2312 (6032 Metric) case, Tape & Reel

$0.6360Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSC156M020R0450 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR450mOhm
Voltage - rated20 V
Operating temperature-55°C~125°C
Size (Dimension)0.236\" L x 0.126\" W (6.00mm x 3.20mm)
Height - seated0.110\" (2.80mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±20%
Capacitance15 µF
Case2312 (6032 Metric)
Manufacturer size codeC

Product details

15 µF at 20 V with 450 mOhm ESR floor

The TPSC156M020R0450 is a molded tantalum capacitor from the KYOCERA AVX TPS series, rated 15 µF ±20% at 20 V. The 450 mOhm ESR is the dominant loss term — it sets the ripple current capability and self-heating under AC load, which is the first check for a bulk decoupling or output filter role on a 12 V rail.

Rated for -55 to 125 °C, this cap covers the full military temperature band — avionics, downhole instrumentation, and outdoor telecom enclosures where the ambient swings well past commercial limits. The 2312 (6032 Metric) case is a standard footprint; the molded body reflows cleanly with a typical 260 °C peak profile.

The TPS series is a broad tantalum line; if a lower ESR is needed, the sibling TPSC156M020R0300 (300 mOhm) is a direct footprint swap, but the 450 mOhm variant is the standard-grade option.

Frequently asked questions

Can TPSC156M020R0450 replace TPSC156M020R0300?

Both share the same 15 µF capacitance, 20 V rating, and 2312 case — they are footprint-identical. The difference is ESR: 450 mOhm on this part versus 300 mOhm on the R0300. If your circuit's ripple current or transient response is marginal at 450 mOhm, the R0300 is the lower-loss drop-in. For general bulk decoupling, the 450 mOhm variant is adequate.