The TAJC106K035H: Rated 35 V with 10 µF capacitance in a 2312 molded case — a 50% derating on a 24 V bus leaves 17.5 V headroom, which is standard practice for tantalum reliability in power-supply decoupling and hold-up circuits.
1.6 Ohm ESR — ripple current and self-heating
The 1.6 Ohm ESR at 100 kHz sets the ripple current capability — at 35 V this cap can handle roughly 200 mA RMS before self-heating becomes a concern, which is adequate for output filtering on a low-power DC-DC converter or as a bulk decoupling cap on a mixed-signal board.
Molded case — rework and board-fit notes
Molded tantalum construction in a 2312 (6032 Metric) case with 2.80 mm seated height — the epoxy body is less thermally massive than a conformal-coated style, so a standard hot-air rework station at 260°C for 10 seconds per terminal lifts the part clean without pad damage.