0.5 pF ESD clamp for high-speed differential pairs
The D5V0F1U2LP3-7: Its 0.5 pF capacitance at 1 MHz keeps the load off the bus — HDMI differential pairs, USB 2.0 D+/D−, and gigabit Ethernet signal lines see minimal edge-rate degradation from this clamp. Rated for a 5.5 V reverse standoff (max) with a 6 V minimum breakdown, the part clamps a 1.5 A 8/20 µs pulse to 10 V.
0201 footprint, X3-DFN0603-2 body
The two-pin body sits flush on the board with no exposed lead, so the parasitic inductance is low and the clamp response is fast. Store the reels dry — the package is moisture-sensitive, and a bake cycle before reflow is cheaper than a tombstoned part on a finished board.
Active, sourced per RFQ
The base product number D5V0F1 covers the family; the -7 suffix denotes the tape-and-reel packaging variant.