Obsolete — sourcing through independent channels
The 1.5KE62CA-T: For existing BOM positions, the part is available through independent surplus and broker channels. Availability and pricing are confirmed at RFQ against the specific quantity required.
Transient protection ratings for a 53V rail
The 53V reverse standoff voltage means it sits across a 48V or 53V nominal DC bus without conducting in standby; the 58.9V minimum breakdown is the threshold where clamping begins. This clamp voltage is the figure a downstream regulator or load must survive — if the 85V peak exceeds the downstream device's absolute maximum rating, a secondary clamp or a higher-power TVS is needed.
Bidirectional topology and package
A single device protects both polarities — the bidirectional Zener structure clamps positive and negative transients symmetrically, which is useful on AC-coupled signal lines or bipolar power rails where the return path is not ground-referenced. The DO-201AA axial through-hole package requires a drilled PCB hole and hand or wave-solder assembly. The Tape & Reel packaging is intended for automated insertion equipment, though the reel quantity is not stated.
Temperature range and general-purpose rating
The part is classified for General Purpose applications and does not carry Power Line Protection, meaning it is intended for signal or low-energy DC bus protection rather than direct AC mains suppression.