Specs side by side
2 parts compared · 14 differing specs across 14 total parameters.
| Parameter | ||
|---|---|---|
| Supply voltage | - | The whole point of the suffix: more sustaining and blocking headroom at the same current class. |
| Memory & Peripherals | - | Where 400V-class parts failed repeatedly on mains transients, the grade is the repair - not another brand at the same nominal ratings. |
| Case | TO-220 (13009 also TO-3P) | TO-220 |
| Compatibility Level | - | 100% Drop-in (Zero Code Change) |
| Component Category | High-Voltage Switching Transistors (SMPS) | - |
| Core & Architecture | - | The suffix grades raise the dielectric: VCEO 450V and VCBO toward 800-850V where the base part carries 400V/700V - the honest choice for 220-240VAC input stages and ballast transients. |
| Firmware Notes | - | Grading up in voltage is free at the circuit level; fitting the base grade into a socket that ate two predecessors is how the third failure gets scheduled. |
| Hardware Notes | - | Same TO-220 body and pin order. |
| Lead Time Advantage | - | Shenzhen Spot Stock (24-48h Dispatch) |
| Market Reality | The MJE13005/13007/13009 ladder is the high-voltage NPN switch line of ATX supplies, chargers, adapters and ballast circuits: 400V sustaining, 700V blocking, and 4A / 8A / 12A of collector current in the same TO-220 body - the 13007 being the half-bridge classic that every ATX repair bench has burned and replaced. Part of the repair culture treats them as MOSFETs because of where they sit; the drive reality is bipolar, through a base network that dies with them. The rating sheet hides one more misread: 400V and 700V are simultaneous numbers (VCEO and VCBO), not two competing parts. | - |
| Reference Part | - | MJE13007 |
| Role In Circuit | Original Reference Part | - |
| Sourcing Advantage | - | Stocked; order by suffix, not by family. |
| Sourcing Status | Active Shenzhen Spot Sourcing (24–48h) | - |
Parts
- MJE13007 · onsemi
- MJE13007A / MJE13007AH · onsemi