Specs side by side

2 parts compared · 13 differing specs across 14 total parameters.

Quote all 2 parts
Specification differences for L7905 / L7912, L79xxAC
Parameter
Supply voltage-Same rails; the grade buys accuracy, not headroom.
Memory & Peripherals-Where it matters: reference-derived negative rails, ADC bipolar front ends, and any repair where the original was a precision grade and drift was the complaint that started the repair.
Compatibility Level-100% Drop-in (Zero Code Change)
Component CategoryFixed Linear Voltage Regulators (78xx / 79xx)-
Core & Architecture-The tightened-tolerance build of the same regulators: 2 percent output tolerance against the looser commercial grades, in the same pin map and the same power ratings.
Firmware Notes-Grade substitution rule as everywhere: precision upward is free; dropping from AC into a circuit that calibrated against it shifts the rail by the tolerance difference.
Hardware Notes-TO-220 / insulated TO-220FP / D2PAK options across the family.
Lead Time Advantage-Shenzhen Spot Stock (24-48h Dispatch)
Market RealityThe 79xx series is the negative rail of every split supply that ever fed an op-amp, an audio stage or an instrument: -5V, -8V, -9V, -12V, -15V, -18V and -24V fixed 1.5A regulators in the same TO-220 body as the 78xx - and with a mirrored pinout that catches one swap per bench per year. The digits choose the voltage, the suffix grade (AC = 2 percent tolerance) chooses precision, and the prefixes (L, MC, KA, LM) are the familiar second-source names. The classic failure this page exists for: treating a 7905 as a misplaced 7805, when it differs in polarity, pin order AND tab potential - three separate ways to smoke a board at once.-
Reference Part-L7905 / L7912
Role In CircuitOriginal Reference Part-
Sourcing Advantage-Stocked; quote the grade the schematic asked for.
Sourcing StatusActive Shenzhen Spot Sourcing (24–48h)-
CaseTO-220 / TO-220FP / D2PAKTO-220 / TO-220FP / D2PAK

Parts