Specs side by side

2 parts compared · 14 differing specs across 14 total parameters.

Quote all 2 parts
Specification differences for ATL431, TL431
Parameter
Supply voltageSame 2.5V-class reference; much lower minimum bias current - useful where the original could not regulate at light load.-
Memory & PeripheralsSOT-23 footprint matching the TL431 DBZ arrangement; works in divider-based feedback loops.-
CaseSOT-23SOT-23 / TO-92 / SOT-89 / SOIC-8
Compatibility LevelPin-to-Pin (Minor Clock/Init Tuning)-
Component Category-Programmable Shunt Voltage References
Core & ArchitectureAn improved TL431: same 2.5V-class reference with a far lower minimum cathode current (tens of microamps class versus 1mA), aimed by TI at modernizing existing TL431 designs.-
Firmware NotesIn most feedback loops it works without component changes. Where the original circuit was designed around the 1mA minimum bias, re-check loop compensation and start-up behavior - the improvement changes those margins.-
Hardware NotesSOT-23 land pattern matches the TL431 DBZ footprint; orientation follows the same K / R / A pin order as the TL431 (not the TL432).-
Lead Time AdvantageShenzhen Spot Stock (24-48h Dispatch)-
Market Reality-The TL431 sits in the feedback loop of a large share of the flyback supplies ever built - one of the highest-volume analog parts in existence. Genuine supply is never the issue. The issues are three: the tolerance grade (2 percent / 1 percent / 0.5 percent) that decides regulation accuracy, the pinout that differs between TL431 and TL432 and between packages, and the lookalike low-voltage parts (TLV431, LMV431) that are not drop-ins at all. A repair that fits the right part with the wrong orientation simply does not regulate.
Reference PartTL431-
Role In Circuit-Original Reference Part
Sourcing AdvantageActive TI production; the forward-looking replacement for new builds and redesigns.-
Sourcing Status-Active Shenzhen Spot Sourcing (24–48h)

Parts