Specs side by side

2 parts compared · 14 differing specs across 14 total parameters.

Quote all 2 parts
Specification differences for 25N120 (market grade), FGA25N120
Parameter
Supply voltage1200V class as marked; verify by curve trace or an in-circuit thermal check before batch fitting.-
Memory & PeripheralsThe clone-era failure story in one line: hotter saturation, hotter heatsink, shorter life - the false economics of the two-dollar difference.-
CaseTO-3P / TO-247 as markedTO-3P (EIAJ SC-65) / TO-247
Compatibility LevelFunctional Equivalent-
Component Category-IGBTs (Discrete)
Core & ArchitectureThe unbranded 25N120 that fills repair channels: usually functional, frequently with saturation voltage above 2.6V against the 2.0V-class genuine die - the difference shows up as heat in continuous duty.-
Firmware NotesWhere market-grade parts are acceptable (prototype, low duty), test each lot; where the repair must not come back, verified branded stock with photos is the cheaper part.-
Hardware NotesTO-3P/TO-247 as marked; inspect the die pad and marking under magnification on receipt.-
Lead Time AdvantageShenzhen Spot Stock (24-48h Dispatch)-
Market Reality-The 25N120 is the 1200V, 25A IGBT that anchors the power stage of welder inverters, induction heating boards and inverter supplies: a TO-3P body (the onsemi FGA25N120ANTD) or a TO-247 body (the Infineon IKW25N120), gate-collector-emitter in one shared order, a free-wheel diode co-packed, and a market full of mystery-grade 25N120 clones whose saturation voltage gives them away. The onsemi datasheet now carries a discontinued marking, which quietly moves this staple toward last-time-buy sourcing - and that is where verified, photographed stock becomes the difference between a repair and a comeback.
Reference PartFGA25N120-
Role In Circuit-Original Reference Part
Sourcing AdvantageWe quote both lanes honestly: verified branded stock, or market grade with the tests stated up front.-
Sourcing Status-Active Shenzhen Spot Sourcing (24–48h)