4600 V/µs current-feedback amplifier for high-speed signal chains
The AD8014ARTZ-REEL7 is a single-channel current-feedback operational amplifier from Analog Devices that delivers a 4600 V/µs slew rate and 480 MHz -3 dB bandwidth while drawing only 1.15 mA of supply current. This combination of speed and low power makes it a fit for applications where a fast settling pulse or large-signal swing is needed without loading the power budget — think video line drivers, ADC front-ends, or high-speed photodiode transimpedance stages. The current-feedback topology means gain-bandwidth product is not fixed; bandwidth stays relatively flat across gain settings, so the same part can serve a unity-gain buffer or a gain-of-10 stage without trading off closed-loop bandwidth. The 50 mA output drive per channel is enough to drive 50 Ω back-terminated cables or multiple ADC inputs in parallel.
Supply range and temperature grade for industrial signal conditioning
The 4.5 V minimum means it runs cleanly from a 5 V rail with headroom for the output swing, while the 12 V maximum covers ±6 V or single 12 V industrial supplies. These DC specs are adequate for AC-coupled or high-speed signal paths where the dominant error is noise or distortion rather than DC precision; for a DC-accurate front-end, a precision op-amp in the same signal chain would handle the low-frequency path.
SOT-23-5 package and surface-mount assembly
The AD8014ARTZ-REEL7 comes in a 5-lead SOT-23 package (SC-74A, SOT-753), a standard small-outline footprint for space-constrained PCBs. The surface-mount package suits automated pick-and-place assembly and reflow soldering. The tape-and-reel option (REEL7 suffix) is the production-friendly format; cut tape is also available for prototyping or low-volume builds.