Skip to main content
Log in
Texas Instruments LM358P — Analog & Data Acquisition

LM358P General Purpose Op-Amp, 700 kHz, 0.3 V/µs, 8-DIP

MPNLM358P
End of Life

Texas Instruments LM358P, General Purpose Amplifier, 2 Circuit, 8-DIP (0.300", 7.62mm), Through Hole, 700 kHz Gain Bandwidth, 0.3 V/µs Slew Rate, 3 V to 30 V Supply, 0°C to 70°C.

$0.2700Ref. price · indicative, final on quote
Texas Instruments LM358P datasheet (PDF)
Packaging8-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LM358P specifications
ParameterValue
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset3 mV
Voltage - supply span30 V
Current - supply500µA (x2 Channels)
Current - input bias20 nA
Current - output (Channel)40 mA
Operating temperature0°C ~ 70°C (TA)
Gain bandwidth product700 kHz
PackageTube
Slew rate0.3V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

The Texas Instruments LM358P is a dual-channel general-purpose operational amplifier in an 8-pin DIP through-hole package. It delivers 700 kHz gain-bandwidth product and a 0.3 V/µs slew rate from a single supply spanning 3 V to 30 V, drawing 500 µA per channel.

It belongs in indoor equipment — office peripherals, consumer electronics, laboratory instruments, HVAC controllers — not in engine bays, outdoor telecom cabinets, or factory-floor enclosures where ambient can push past 70°C. If your BOM calls for the LM358P but the system sees -20°C startup, look at the industrial-temperature LM358 variants or the TLV series.

Frequently asked questions

What is the difference between the LM358P and the TLV9351IDCKR?

The TLV9351IDCKR is a single-channel, rail-to-rail output op-amp in a tiny SOT-23 package with 3.5 MHz GBW, 20 V/µs slew rate, and 10 pA input bias current — significantly faster and more precise than the LM358P. It operates from 4.5 V supply and over -40°C to 125°C. The LM358P is a dual-channel, through-hole part with 700 kHz GBW, 0.3 V/µs slew rate, and 20 nA bias current, limited to 0°C to 70°C. The TLV9351 is a functional upgrade for single-channel applications that need higher speed, rail-to-rail output, and wider temperature range, but it requires an SMD footprint and a different PCB lay