The LM358D comes in an 8-SOIC package (3.90 mm width) for surface-mount assembly. The supplier device package is also 8-SOIC. It ships in Tube form — not Tape & Reel — so plan for tube feeding on the pick-and-place line or transfer to tape if your feeder requires it.
LM358D
Texas Instruments · Automotive, AEC-Q100 Series
STMicroelectronics LM358D, General Purpose Amplifier, 2 Circuits, 700 kHz Gain Bandwidth, 0.3 V/µs Slew Rate, 3 V to 30 V Supply, 8-SOIC Package, 0°C to 70°C.
[IN STOCK] In Stock: 92,520 pcs
MOQ 20 · Tube · RoHS · EIA-481 · DAP/DDP · T/T
Technical specifications
| Parameter / Attribute | Specification / Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 30 V |
| Current - supply | 500µA (x2 Channels) |
| Current - input bias | 20 nA |
| Current - output (Channel) | 40 mA |
| Operating temperature | 0°C~70°C(TA) |
| Gain bandwidth product | 700 kHz |
| Package | Tube |
| Slew rate | 0.3V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
100% Footprint Match · Solder-Ready (No PCB Redesign Needed)
Need Stock or a Drop-in Second-Source for LM358D?
Package: SOIC-8 · Pin-compatible replacements with immediate Shenzhen spot stock
Footprint Match 100%
Supply Chain & Allocation Reality:
The ubiquitous dual op-amp designed in the 1970s. While cheap, legacy bipolar LM358 parts suffer from crossover distortion and output swing limited to V+ - 1.5V. Modern precision drop-in replacements like SGMicro SGM8552 and 3PEAK TP358 deliver rail-to-rail I/O, lower offset voltage, and microamp quiescent power at comparable pricing.
Verified Pin-Compatible Replacements (2 verified alternatives)
SGM8552-SR SGMicro SOIC-8
100% Drop-in (Zero Code Change)
Availability & Target Pricing:
Rail-to-Rail Performance with High Dynamic Range ADC Support
Shenzhen Spot Inventory (24h Dispatch)
Electrical & Core Specs:
1.5 MHz Gain Bandwidth, Rail-to-Rail Input and Output
2.5V – 5.5V single supply (or ±1.25V to ±2.75V dual)
Compatibility & Drop-In Notes: No firmware interaction. Analog signal conditioning drop-in.
Package & Solder Footprint: Direct pin-for-pin replacement in SOIC-8 / MSOP-8. Rail-to-rail output swing allows full 0V to 3.3V / 5.0V ADC dynamic range utilization without losing 1.5V overhead.
Shenzhen Warehouse Stock & MOQ: SGMicro is China premier precision analog IC manufacturer; Tier-1 automotive and mobile OEM approved.
TP358-SR 3PEAK SOIC-8
100% Drop-in (Zero Code Change)
Availability & Target Pricing:
Large Factory Buffer Stock & Zero Allocation Risk
Large Factory Buffer Stock
Electrical & Core Specs:
1.0 MHz GBW, Low Quiescent Current (60 µA/ch)
2.1V – 5.5V single supply
Compatibility & Drop-In Notes: None.
Package & Solder Footprint: Direct solder drop-in on standard SOIC-8 op-amp layout.
Shenzhen Warehouse Stock & MOQ: Zero allocation risk; full factory COC and batch reel traceability.
Buyer & Quality Checklist for Sourcing Alternatives
- Check maximum supply voltage: legacy bipolar LM358 operates up to 32V; if your circuit runs on 12V–24V supply rails, select high-voltage variants (e.g., SGM8272 or TP156) instead of 5.5V rail-to-rail models.
- Confirm ADC input scaling: rail-to-rail output swings up to VCC - 10mV, allowing higher dynamic measurement resolution for current sense shunts.
Frequently Asked Technical Questions
Q: When should I upgrade from legacy LM358 to SGM8552 or TP358?
A: Upgrade if your system operates on 3.3V or 5V logic rails and feeds an internal microcontroller ADC. Legacy LM358 cannot drive outputs higher than ~1.8V on a 3.3V supply, throwing away nearly half of your ADC conversion resolution. Rail-to-rail alternatives solve this instantly with zero board changes.
Technical details
LM358D
[ALLOC] verified