10 µH wirewound inductor for automotive power filtering
The Taiyo Yuden LBC2518T100KV is a 10 µH wirewound inductor from the LB, C Type series, packaged in a 1007 (2518 Metric) surface-mount footprint. Wirewound construction delivers a self-resonant frequency of 30 MHz, making it suitable for DC-DC converter output filtering and EMI suppression in automotive electronics. Rated for 375 mA continuous current with a DC resistance of 360 mOhm, the inductor's DCR sets the I²R conduction loss — at full rated current, dissipation is roughly 50 mW, manageable in the 1007 package without significant self-heating. AEC-Q200 qualification certifies the part for automotive stress grades including vibration, thermal shock, and solder heat resistance — a requirement for under-hood or cabin electronic modules.
NRND lifecycle — sourcing through independent channels
This means the manufacturer no longer supports new design-ins, though existing production may continue through the end of the lifecycle window. For BOM lines already qualified to this inductor, the NRND status flags a need to evaluate a drop-in replacement before the part reaches full EOL. No official successor order code is recorded in the lifecycle data — a parametric search for 10 µH, 375 mA, 360 mOhm DCR in the same 1007 footprint will surface alternatives from the LB series or competing wirewound families. Current availability and pricing are confirmed at RFQ through independent distribution channels — the part is sourced to order, not held in ready inventory.
1007 package and temperature grade
The unshielded construction means the inductor's magnetic field couples into nearby traces — keep sensitive signal routing clear of the component footprint. The ±10% tolerance on the 10 µH nominal value is standard for power-grade inductors; tighter tolerance is not available in this series.