6ES71326BH010BA0 — SIMATIC ET 200SP Digital Output Module
6ES71326BH010BA0 — the BH suffix places this module in Siemens' SIMATIC ET 200SP distributed I/O family as a 16-channel digital output card. The record shows 24 VDC nominal operation, an operating temperature range of 30°C to 60°C, and bulk packaging intended for system-level integration rather than individual unit retail.
Catalog Comparison
The table below screens the primary part against in-catalog peers sharing the same ET 200SP DQ family designation. All parts listed require the reader's own technical qualification before use.
| Specification | 6ES71326BH010BA0 (seed) | 6ES71326BH012BA0 | 6ES71326BH000AA0 | 6ES71326BF010BA0 |
|---|---|---|---|---|
| Number of Outputs | 16 – Digital | 16 – Digital | 16 – Digital | 8 – Digital |
| Operating Temperature | 30°C ~ 60°C | 30°C~60°C | 30°C~60°C | 30°C~60°C |
| Encapsulation | Bulk | Box | Box | Bulk |
| Mounting Type | Requires Basic Unit | DIN Rail | DIN Rail | Requires Basic Unit |
| Series | SIMATIC ET 200SP | SIMATIC ET 200SP | SIMATIC ET 200SP | SIMATIC ET 200SP |
- 6ES71326BH012BA0: Same 16-output DQ count and temperature band; boxed packaging and direct DIN rail mounting differ from the seed's bulk pack and basic-unit-only mounting. Both carry ROHS3 Compliant status and target the same ET 200SP base.
- 6ES71326BH000AA0: Shares 16 digital outputs and operating temperature; boxed packaging and DIN rail mounting variant provide a more conventional panel-rail form factor compared to the seed's bulk configuration.
- 6ES71326BF010BA0: Halves the output count to 8 channels but retains the bulk encapsulation and basic-unit mounting requirement, offering a smaller footprint within the same ET 200SP series family.
Parameter Summary
- 16 discrete digital outputs
- Series: SIMATIC ET 200SP
- Operating Temperature: 30°C ~ 60°C
- Mounting: Requires Basic Unit
- Encapsulation: Bulk
- Ingress Protection: IP20
- RoHS: ROHS3 Compliant
- Product Status: Active
- For Use With: SIMATIC ET 200SP
Installation Notes
- The IP20 rating limits this module to enclosure or cabinet-level installation where personnel contact is restricted during operation.
- Mounting requires a compatible ET 200SP basic unit — the module does not mount directly to a DIN rail independently.
- The 30°C to 60°C temperature range accommodates typical industrial enclosure environments but excludes unconditioned outdoor or near-heat-source placements without supplemental cooling.
- Bulk packaging suggests ordering quantities aligned with system-level build runs rather than spare-parts stock.