SIMATIC IPC477E PRO. 15" MTOUCH (6AV72511CB350FA0)
Panel-mount industrial PC with 15" projected-capacitive touchscreen, Celeron G3902E processor, and IP65 front-face protection.
IPC477E display size variants
The 6AV7251x…FA0 series covers 15" (C‑prefix) and 19" (G‑prefix) footprints under the same enclosure family. The seed carries a C‑prefix (15" panel); several alternates in this set offer the same processor, mounting, and IP rating in the larger 19" format or with alternate CPU options (Core i5-6442EQ). All share panel-mount geometry, IP65 sealing, and DDR4 memory architecture within the SIMATIC IPC477E PRO line.
Engineering verification checklist
- Confirm panel-cutout dimensions match the 15" SIMATIC IPC477E PRO bezel specification before machining
- Verify 24 VDC power-supply sizing for the Celeron G3902E load; confirm branch-protection rating at the panel distribution point
- Check that field-wiring to all discrete I/O, Ethernet, and USB ports routes clear of the ventilation zone on the rear chassis
- Confirm front-face IP65 seal integrity after panel-mount clamping; verify gasket compression per Siemens torque guidance
- Validate operating temperature derating if enclosure internal temperature exceeds 45 °C ambient under worst-case load
- Ensure operating-system license scope (Windows 7/10) aligns with SCADA runtime requirements and IT security policy
- Verify CE, CSA, cULus, UL, EAC, KC, and RCM certifications cover the specific end-country installation site
- Confirm DDR4 module configuration does not exceed the 16 GB maximum capacity stated in the record
- Test that touchscreen USB/serial interface enumerates correctly with the target HMI runtime or visualization software