Skip to main content
Renesas Electronics PS2701A-1-V-F3-A — Optoisolators

PS2701A-1-V-F3-A NEPOC Optoisolator, 3750Vrms

MPNPS2701A-1-V-F3-A
End of Life

NEPOC PS2701A-1-V-F3-A, single-channel DC-input transistor-output optoisolator, 3750Vrms isolation, 50% to 300% CTR at 5mA, 70V output rating, 4-SMD Gull Wing package, -55°C to 100°C operating range.

$1.03Ref. price · indicative, final on quote
Packaging4-SMD, Gull Wing
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

PS2701A-1-V-F3-A Technical Specifications
ParameterValue
SeriesNEPOC
Input typeDC
Output typeTransistor
Mounting typeSurface Mount
Voltage - isolation3750Vrms
Voltage - output70V
Voltage - forward (Vf)1.2V
Current - output (Channel)30mA
Current transfer ratio300% @ 5mA
Current - DC forward (If)30 mA
Operating temperature-55°C ~ 100°C
PackageTape & Reel (TR); Cut Tape (CT)
Case4-SMD, Gull Wing
Number of channels1
Vce saturation300mV
Rise (Fall time)5µs, 7µs

Product details

3750Vrms isolation in a 4-SMD gull-wing package

The PS2701A-1-V-F3-A is a single-channel optoisolator from Renesas's NEPOC series, pairing a DC-input LED with a phototransistor output in a 4-SMD gull-wing package. Its 3750Vrms isolation rating provides basic safety isolation for separating low-voltage control logic from higher-voltage load circuits, common in industrial I/O modules, PLC interfaces, and isolated sensor feedback paths. The transistor output can switch up to 70V and 30mA, suiting level-shifting and logic-signal isolation in 24V industrial buses.

The current transfer ratio spans 50% minimum to 300% maximum at a 5mA forward current, giving the designer a predictable gain window for driving a logic input or a downstream transistor. A CTR of 50% at 5mA means the output transistor can sink at least 2.5mA, enough to pull a TTL or CMOS input low with margin. The 300% ceiling keeps the output from saturating too hard at high LED drive, which would slow turn-off. Typical rise and fall times are 5µs and 7µs respectively, limiting the usable switching frequency to roughly 50-70 kHz — fine for 10kHz PWM or 115kbps serial isolation, but not for high-speed data links.

Temperature range and environment

Rated for -55°C to 100°C operating temperature, this opto handles cold-start in outdoor telecom cabinets and the waste heat inside a sealed industrial enclosure. The 100°C ceiling is the ambient limit, not junction — derate output current if running near the top end. Storage temperature is wider, but the part is MSL-rated per the package; the gull-wing leads reflow easily with standard lead-free profiles.

Lifecycle and compliance

The NEPOC series has broad distribution support; the PS2701A-1-V-F3-A is the tape-and-reel variant of the base PS2701A-1, which simplifies inventory management for volume builds. No official second-source cross is listed, but the PS2801C-4-V-A is a four-channel sibling with the same 300mV Vce(sat) and 5µs/7µs timing — useful if your BOM needs a multi-channel drop-in for a different board revision.

Frequently asked questions

What is the current transfer ratio (CTR) of PS2701A-1-V-F3-A?

The CTR is specified as 50% minimum and 300% maximum, both measured at a forward current of 5mA. This range ensures consistent logic-level drive across production lots.