Skip to main content
Renesas Electronics ISL83075EIBZA — Sensors & Transducers

ISL83075EIBZA – Renesas RS-485/RS-422 Half-Duplex

MPNISL83075EIBZA
End of Life

Renesas ISL83075EIBZA, RS-422/RS-485 half-duplex transceiver, 500 kbps data rate, 3.0 V–3.6 V supply, industrial temp -40°C to 85°C, 8-SOIC (0.154", 3.90 mm width) surface-mount package.

$2.31Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ISL83075EIBZA specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature-40°C ~ 85°C
DuplexHalf
PackageTube
Data rate500kbps
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis15 mV
Number of drivers (Receivers)1/1

Product details

The ISL83075EIBZA is a half-duplex RS-422/RS-485 transceiver from Renesas, rated for a data rate of 500 kbps. At this speed on a typical twisted-pair RS-485 bus, you can run cable lengths up to roughly 1200 metres before signal degradation eats the margin — the 15 mV receiver hysteresis gives you noise immunity on long drops in industrial environments.

Supply rail and temperature – fit check for the BOM

This part runs on a single 3.0 V to 3.6 V rail — a tight 3.3 V ±10 % supply. It is not a wide-input part; your board needs a clean 3.3 V bus already in place.

Package and rework – 8-SOIC narrow-body

No special bake-out required for MSL level (typical for this package class).

Frequently asked questions

Is the ISL83075EIBZA suitable for RS-485 communication at 500 kbps?

Yes, the ISL83075EIBZA is an RS-422/RS-485 transceiver rated for a data rate of 500 kbps. At that speed on a typical twisted-pair bus, you can expect cable runs up to roughly 1200 metres before signal integrity degrades. The 15 mV receiver hysteresis helps reject noise on long drops.

Is the ISL83075EIBZA RoHS compliant and lead-free?

Yes, the ISL83075EIBZA is ROHS3 Compliant, meaning it meets the EU RoHS directive without any exemptions for lead or other restricted substances.