Skip to main content
Renesas Electronics 74FCT16952ETPAG — Analog & Data Acquisition

Renesas 74FCT16952ETPAG 16-Bit Transceiver, 5.5V, 56-TSSOP

MPN74FCT16952ETPAG
End of Life

Renesas Electronics 74FCT series, 74FCT16952ETPAG, Transceiver Non-Inverting, 16-bit (2 x 8-bit), 3-State output, 4.5V to 5.5V supply, 56-TFSOP (0.240", 6.10mm Width), Surface Mount.

$2.01Ref. price · indicative, final on quote
Packaging56-TFSOP (0.240", 6.10mm Width)
Series74FCT
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

74FCT16952ETPAG specifications
ParameterValue
Series74FCT
Logic typeTransceiver, Non-Inverting
Output type3-State
MountingSurface Mount
Voltage4.5V ~ 5.5V
Current - output high, low32mA, 64mA
Operating temperature-40°C ~ 85°C (TA)
PackageBulk
Case56-TFSOP (0.240\", 6.10mm Width)
Number of elements2
Number of bits per element8

Product details

16-bit bus transceiver with 5V logic and 32/64 mA drive

The Renesas 74FCT16952ETPAG is a 16-bit non-inverting transceiver organized as two 8-bit elements, each with independent 3-state output control. Output drive is rated 32 mA source and 64 mA sink — the asymmetric sink strength handles heavily loaded data lines without external buffers, while the 3-state outputs let multiple transceivers share the same bus without contention.

Package and board-fit for the 56-TSSOP footprint

Supplied in a 56-TFSOP package (0.240-inch body width, 6.10 mm) with a surface-mount footprint that matches the industry-standard 56-TSSOP land pattern. The 0.5 mm pin pitch requires a controlled-impedance PCB stack-up for the data lines if the bus runs above 50 MHz, though the 74FCT family's propagation delay typically keeps the edge rate manageable without series termination on short traces.

Frequently asked questions

What is the closest pin-compatible alternative to the 74FCT16952ETPAG in this family?

The 74FCT series includes other 16-bit transceivers, but pin assignments vary by function and package variant — confirm the BOM position's footprint and logic function before substituting.