Skip to main content
Log in
NXP USA Inc. MKL36Z128VLH4 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP MKL36Z128VLH4 Kinetis KL3 MCU, 48 MHz, 128 KB Flash, 64-LQFP

MPNMKL36Z128VLH4
Active

NXP Kinetis KL3 series, 32-bit ARM Cortex-M0+ MCU, MKL36Z128VLH4, 48 MHz, 128 KB Flash, 16 KB RAM, 50 I/O, integrated LCD controller, LINbus, 64-LQFP (10x10 mm), -40 to 105°C, 1.71 to 3.6 V supply.

$7.8800Ref. price · indicative, final on quote
NXP USA Inc. MKL36Z128VLH4 datasheet (PDF)
Packaging64-LQFP
RoHSROHS3 Compliant
SeriesKinetis KL3
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MKL36Z128VLH4 specifications
ParameterValue
SeriesKinetis KL3
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 3.6V
Operating temperature-40°C ~ 105°C (TA)
Speed48MHz
PackageTray
RAM size16K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, LVD, POR, PWM, WDT
ConnectivityI²C, LINbus, SPI, UART/USART
Number of i (O)50
Core processorARM® Cortex®-M0+
Case64-LQFP
Data convertersA/D - 16bit; D/A - 12bit
Program memory size128KB (128K x 8)

Product details

48 MHz Cortex-M0+ with on-chip LCD drive

The NXP MKL36Z128VLH4 is a 32-bit ARM Cortex-M0+ MCU from the Kinetis KL3 series, clocked at 48 MHz with 128 KB Flash and 16 KB RAM. The 50 general-purpose I/O lines and LINbus connectivity suit it for automotive body-control modules and industrial sensor nodes that communicate over a local interconnect network.

Memory and peripheral budget

The Flash holds a moderate firmware image — enough for a segmented LCD application with LIN communication and basic control logic, but not for a full GUI frame buffer or heavy data logging. The 16-bit ADC and 12-bit DAC provide analog front-end capability for sensor conditioning without an external converter.

Frequently asked questions

What is MKL36Z128VLH4's core speed?

The ARM Cortex-M0+ core runs at 48 MHz, which is the maximum clock for this Kinetis KL3 variant. That speed supports typical control-loop and display-update cycles without external oscillators — the internal oscillator is rated for this range.

What compliance documentation does NXP provide for MKL36Z128VLH4?

The part is ROHS3 compliant. NXP typically provides a material declaration and REACH statement upon request through the distributor or their documentation portal.