NXP LPC40xx series, LPC4078FET208,551 — 32-bit ARM Cortex-M4 MCU, 120MHz, 512KB Flash, 96KB RAM, Ethernet, USB OTG, 2.4V–3.6V supply, -40 to 85°C, 208-TFBGA (15x15 mm).
| Parameter | Value |
|---|---|
| Series | LPC40xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 2.4V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 120MHz |
| Package | Tray |
| RAM size | 96K x 8 |
| Core size | 32-Bit Single-Core |
| EEPROM size | 4032 x 8 |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Connectivity | CANbus, EBI/EMI, Ethernet, I²C, IrDA, Microwire, QEI, SD, SPI, SSI, SSP, UART/USART, USB, USB OTG |
| Number of i (O) | 165 |
| Core processor | ARM® Cortex®-M4 |
| Case | 208-TFBGA |
| Data converters | A/D 8x12b; D/A 1x10b |
| Program memory size | 512KB (512K x 8) |
The 120 MHz core runs a real-time control loop alongside a TCP/IP stack without an external protocol processor.
Yes, this MCU supports both Ethernet and USB OTG. The connectivity list includes Ethernet MAC, USB host/device/OTG, CAN, I²C, SPI, SSI, UART, and IrDA. That covers the typical panel-to-plant network interface for a remote I/O module or a human-machine interface (HMI) back-end.
Yes, it includes an Ethernet MAC and USB OTG, along with CAN, I²C, SPI, and UART interfaces.
The core runs at 120 MHz — the ARM Cortex-M4 with single-cycle multiply and hardware divide.
The 208-ball TFBGA pinout is defined in the NXP LPC40xx user manual and datasheet; the base product number is LPC4078.
Pin-compatible alternatives within the LPC40xx family include the LPC4076 (smaller Flash) and LPC4078 variants in different packages or temperature grades. No official second-source cross-reference is recorded.