NXP LPC2300 series ARM7 MCU, order code LPC2366FBD100CP329: 72 MHz ARM7TDMI-S core, 256 KB Flash, 58 KB SRAM, Ethernet MAC, dual CAN 2.0B, USB 2.0 OTG, six 10-bit ADC channels, one 10-bit DAC, 70 GPIO, 100-LQFP 14×14 mm package, -40°C to 85°C, 3 V to 3.6 V supply.
| Parameter | Value |
|---|---|
| Series | LPC2300 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 3V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 72MHz |
| Package | Bulk |
| RAM size | 58K x 8 |
| Core size | 16/32-Bit |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Connectivity | CANbus, Ethernet, I²C, Microwire, SPI, SSI, SSP, UART/USART, USB |
| Number of i (O) | 70 |
| Core processor | ARM7® |
| Case | 100-LQFP |
| Data converters | A/D 6x10b; D/A 1x10b |
| Program memory size | 256KB (256K x 8) |
The 70 GPIO lines, six 10-bit ADC channels, and one 10-bit DAC are available.
NXP is still accepting factory orders; there is no last-time-buy window open. For BOM freeze planning, this means the part is not at immediate risk of obsolescence, but the LPC2300 series is a mature ARM7 portfolio — keep an eye on PCNs if you are tooling a multi-year production run.
No, the LPC2366FBD100CP329 is listed as Active. NXP continues to manufacture it; no last-time-buy has been announced.
The supply range is 3 V to 3.6 V, typically a single 3.3 V rail.
The core runs at 72 MHz.
It comes in a 100-LQFP 14×14 mm surface-mount package.