NXP LPC2300 series ARM7 16/32-bit MCU, LPC2364FET100,518 — 72 MHz, 128 KB Flash, 34 KB SRAM, 70 I/O, CAN 2.0B, Ethernet 10/100, USB 2.0 Full Speed, 3V–3.6V, -40°C to 85°C, 100-TFBGA (9×9 mm).
| Parameter | Value |
|---|---|
| Series | LPC2300 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 3V ~ 3.6V |
| Operating temperature | -40°C ~ 85°C (TA) |
| Speed | 72MHz |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| RAM size | 34K x 8 |
| Core size | 16/32-Bit |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Connectivity | CANbus, Ethernet, I²C, Microwire, SPI, SSI, SSP, UART/USART, USB |
| Number of i (O) | 70 |
| Core processor | ARM7® |
| Case | 100-TFBGA |
| Data converters | A/D 6x10b; D/A 1x10b |
| Program memory size | 128KB (128K x 8) |
The 100-ball TFBGA package (9×9 mm) packs 70 general-purpose I/O, plus dedicated pins for the external memory controller, A/D and D/A converters, and the serial interfaces.
Because the part is NRND, buyers should confirm the date-code spread and verify the lot is from a genuine production run before committing a BOM line.
Yes, NXP has classified the LPC2364FET100,518 as NRND (Not Recommended for New Designs). It is not yet fully discontinued, but the manufacturer advises against using it in new product designs.
Yes, the LPC2364FET100 includes both a CAN 2.0B controller and a 10/100 Ethernet MAC on-chip, along with USB 2.0 Full Speed, I²C, SPI, and UART interfaces.
The core runs at 72 MHz, which is the maximum clock for the ARM7TDMI-S core in this device.
NXP has not published an official drop-in replacement for the LPC2364FET100. Because the part is NRND, buyers should evaluate the LPC2300 or LPC1800 series for a functionally compatible upgrade, or contact NXP for a recommended migration path.