Skip to main content
Log in
NXP USA Inc. LPC18S57JBD208551 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC18S57JBD208551 ARM Cortex-M3 MCU, 180 MHz, 1 MB Flash

MPNLPC18S57JBD208551
Active

NXP LPC18xx series 32-bit ARM Cortex-M3 MCU, LPC18S57JBD208551, 180 MHz core, 1 MB Flash, 136 KB RAM, 142 I/O, CAN/Ethernet/USB, -40°C to 105°C, 208-LQFP.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC18S57JBD208551 specifications
ParameterValue
SeriesLPC18xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.2V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed180MHz
PackageBulk
RAM size136K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, Ethernet, I²C, IrDA, Microwire, QEI, MMC/SD, SPI, SSI, SSP, UART/USART, USB
Number of i (O)142
Core processorARM® Cortex®-M3
Case208-LQFP
Data convertersA/D 8x10b; D/A 1x10b
Program memory size1MB (1M x 8)

Product details

The NXP LPC18S57JBD208551 is a 32-bit ARM Cortex-M3 microcontroller running at 180 MHz, with 1 MB of on-chip Flash and 136 KB of SRAM. It belongs to the LPC18xx series, designed for connectivity-rich embedded control where a single core handles protocol stacks and real-time I/O without a separate communications processor.

This MCU carries CANbus, Ethernet, USB, multiple SPI/I²C/UART interfaces, plus an external memory interface (EBI/EMI) and SD/MMC card support — covering industrial networking, HMI panels, gateway appliances, and data-logging terminals.

At 180 MHz, this core can sustain a TCP/IP stack, a CANopen or Modbus master, and a local control loop without external co-processors. The 1 MB Flash leaves room for a bootloader plus application firmware with over-the-air update capability; the 136 KB SRAM holds multiple packet buffers and a modest RTOS heap.

Frequently asked questions

What is LPC18S57JBD208551's core speed?

The listed core speed is 180 MHz, based on the ARM Cortex-M3 architecture. This throughput supports real-time control loops and protocol processing without a separate communications engine.

What is LPC18S57JBD208551's series?

It belongs to the NXP LPC18xx series, a family of ARM Cortex-M3 and M4 microcontrollers with shared peripheral sets and pin compatibility across density options.

What compliance documentation is available for LPC18S57JBD208551?

Standard compliance documentation including RoHS and REACH declarations is provided with the shipment. The part does not carry AEC-Q100 automotive qualification; it is specified for industrial temperature range (-40°C to 105°C).