NXP LPC18xx series 32-bit ARM Cortex-M3 MCU, LPC1822JET100E, 180 MHz core, 512 KB Flash, 104K x 8 RAM, 16K x 8 EEPROM, 100-TFBGA (9x9 mm), -40 to 105°C, 2.2 to 3.6 V supply.
| Parameter | Value |
|---|---|
| Series | LPC18xx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 2.2V ~ 3.6V |
| Operating temperature | -40°C ~ 105°C (TA) |
| Speed | 180MHz |
| Package | Tray |
| RAM size | 104K x 8 |
| Core size | 32-Bit Single-Core |
| EEPROM size | 16K x 8 |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, WDT |
| Connectivity | CANbus, EBI/EMI, I²C, IrDA, Microwire, SD, SPI, SSI, SSP, UART/USART, USB, USB OTG |
| Number of i (O) | 49 |
| Core processor | ARM® Cortex®-M3 |
| Case | 100-TFBGA |
| Data converters | A/D 4x10b; D/A 1x10b |
| Program memory size | 512KB (512K x 8) |
The NXP LPC1822JET100E is a 32-bit ARM Cortex-M3 MCU running at 180 MHz, with 512 KB of Flash program memory and 104K x 8 of SRAM, plus a separate 16K x 8 EEPROM block for parameter storage.
The 49 GPIOs are mapped through the 100-TFBGA ball grid; plan your PCB fan-out carefully — the 9x9 mm array needs at least a 4-layer board with microvias if you are routing the EBI bus at speed.
The LPC1823JET100E (1 MB Flash) is a pin-compatible density upgrade within the same LPC18xx family and same 100-TFBGA footprint. It is a drop-in replacement if you need more program memory.
The core runs at 180 MHz, based on the ARM Cortex-M3 architecture.
The part is ROHS3 compliant. NXP provides a datasheet, application notes, and a PCN notification channel for any changes. No additional UL or IEC certification is listed for this component.