Skip to main content
NXP USA Inc. LPC1815JBD144E — Microcontrollers & Processors (MCU / MPU / DSP)
NXP USA Inc.

NXP LPC1815JBD144E ARM Cortex-M3 MCU, 180 MHz, 768 KB Flash, 144-LQFP

MPNLPC1815JBD144E
Active

NXP LPC18xx series, ARM Cortex-M3 32-bit single-core at 180 MHz, 768KB Flash / 136KB RAM / 16KB EEPROM, 83 I/O, 2.2–3.6 V, -40 to 105 °C, 144-LQFP tray.

$13.5942Ref. price · indicative, final on quote
LPC1815JBD144E datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LPC1815JBD144E Technical Specifications
ParameterValue
SeriesLPC18xx
Mounting typeSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.2V ~ 3.6V
Operating temperature-40°C ~ 105°C (TA)
Speed180MHz
PackageTray
RAM size136K x 8
Core size32-Bit Single-Core
EEPROM size16K x 8
PeripheralsBrown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, I²C, IrDA, Microwire, SD, SPI, SSI, SSP, UART/USART
Number of i (O)83
Core processorARM® Cortex®-M3
Case144-LQFP
Data convertersA/D 8x10b; D/A 1x10b
Program memory size768KB (768K x 8)

Product details

180 MHz Cortex-M3 with on-chip Flash and EEPROM

The NXP LPC1815JBD144E is a 32-bit ARM Cortex-M3 microcontroller running at 180 MHz, with 768 KB of Flash program memory, 136 KB of SRAM, and 16 KB of on-chip EEPROM. This combination suits control-loop firmware with moderate data logging or calibration tables that benefit from byte-addressable non-volatile storage without external EEPROM. The 2.2 V to 3.6 V supply range and industrial temperature grade (-40 to 105 °C) allow direct use in motor drives, outdoor telecom cabinets, and engine-bay controllers where extended thermal margins are required.

Peripheral set and connectivity

Eighty-three GPIOs are available on the 144-LQFP package. On-chip peripherals include CANbus, EBI/EMI, I²C, SPI, SSI, SSP, UART/USART, IrDA, Microwire, and SD card support.

Frequently asked questions

What is LPC1815JBD144E's listed speed?

The core runs at 180 MHz, which is the maximum clock for the ARM Cortex-M3 on this device. That clock rate supports throughput for real-time control loops and protocol handling without an external oscillator — the internal oscillator is rated for operation.

What compliance documentation does NXP provide for LPC1815JBD144E?

NXP provides RoHS and REACH compliance documentation for this part. The 144-LQFP package is lead-free and meets the current EU directive requirements.