Skip to main content
NXP USA Inc. LPC1812JBD144551 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC1812JBD144551 ARM Cortex-M3 MCU, 180 MHz, 512 KB Flash, 144-LQFP

MPNLPC1812JBD144551
Active

NXP LPC18xx series, ARM Cortex-M3 32-bit MCU, LPC1812JBD144551, 180 MHz, 512 KB Flash, 104 KB SRAM, 16 KB EEPROM, 83 I/O, 144-LQFP (20×20 mm), -40°C to 105°C, 2.2 V to 3.6 V supply.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC1812JBD144551 specifications
ParameterValue
SeriesLPC18xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.2V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed180MHz
PackageBulk
RAM size104K x 8
Core size32-Bit Single-Core
EEPROM size16K x 8
PeripheralsBrown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, I²C, IrDA, Microwire, SD, SPI, SSI, SSP, UART/USART
Number of i (O)83
Core processorARM® Cortex®-M3
Case144-LQFP
Data convertersA/D 8x10b; D/A 1x10b
Program memory size512KB (512K x 8)

Product details

The NXP LPC1812JBD144551 is a 32-bit ARM Cortex-M3 single-core MCU from the LPC18xx series, clocked at 180 MHz with 512 KB Flash, 104 KB SRAM, and 16 KB EEPROM. The 180 MHz core gives you headroom for a single-cycle multiply and deterministic interrupt response in motor-control or CAN-based industrial networks. The 16 KB EEPROM is useful for calibration constants or boot parameters that survive a full erase of the Flash array — no external serial EEPROM needed for that data. The integrated motor-control PWM and DMA engine offload the core for time-critical commutation loops.

Package and footprint — 144-LQFP

The pitch needs a controlled solder profile and a clean stencil aperture — no special via-in-pad required.

Frequently asked questions

What is the core speed of the LPC1812JBD144551?

The ARM Cortex-M3 core runs at 180 MHz, which gives the part a 5.56 ns instruction-cycle time for single-cycle ALU operations.