Skip to main content
NXP USA Inc. LPC1548JBD64151 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC1548JBD64151 ARM Cortex-M3 MCU, 72 MHz, 128 KB Flash

MPNLPC1548JBD64151
Active

NXP LPC15xx series 32-bit ARM Cortex-M3 MCU, 72 MHz, 128 KB Flash, 20 KB RAM, 4 KB EEPROM, CAN/USB/I²C/SPI/UART, 44 I/O, 64-LQFP, -40°C to 105°C.

$9.0502Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC1548JBD64151 specifications
ParameterValue
SeriesLPC15xx
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2.4V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed72MHz
PackageBulk
RAM size20K x 8
Core size32-Bit Single-Core
EEPROM size4K x 8
PeripheralsBrown-out Detect/Reset, DMA, POR, PWM, WDT
ConnectivityCANbus, I²C, SPI, UART/USART, USB
Number of i (O)44
Core processorARM® Cortex®-M3
Case64-LQFP
Data convertersA/D 24x12b
Program memory size128KB (128K x 8)

Product details

72 MHz Cortex-M3 with on-chip EEPROM

The NXP LPC1548JBD64151 is a 32-bit ARM Cortex-M3 microcontroller running at 72 MHz, with 128 KB Flash, 20 KB RAM, and 4 KB EEPROM on-chip. The EEPROM block saves an external serial memory for calibration constants or boot parameters — one less part on the BOM. The 72 MHz core handles real-time control loops and protocol stacks without breaking a sweat, while the 24-channel 12-bit ADC captures analog inputs from sensors or feedback circuits.

Industrial temperature and connectivity

Supply range is 2.4 V to 3.6 V.

Frequently asked questions

What is the difference between LPC1548JBD64151 and LPC1549?

The LPC1549 is a higher-density sibling with more Flash and RAM; the LPC1548JBD64151 carries 128 KB Flash and 20 KB RAM, while the LPC1549 typically doubles those figures. Both share the same 64-LQFP footprint and peripheral set, so a board-level upgrade is possible if firmware grows.

Does LPC1548JBD64151 include a USB controller?

Yes, the connectivity block includes USB along with CANbus, I²C, SPI, and UART/USART.