Skip to main content
NXP USA Inc. LPC1224FBD64/121151 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC1224FBD64/121151 ARM Cortex-M0 MCU, 45 MHz, 48 KB Flash

MPNLPC1224FBD64/121151
Active

NXP LPC1200 series 32-bit ARM Cortex-M0 MCU, LPC1224FBD64/121151, 45 MHz, 48 KB Flash, 4 KB RAM, 55 I/O, 64-LQFP, -40°C to 85°C.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC1224FBD64/121151 specifications
ParameterValue
SeriesLPC1200
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))3V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed45MHz
PackageBulk
RAM size4K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, POR, WDT
ConnectivityI²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART
Number of i (O)55
Core processorARM® Cortex®-M0
Case64-LQFP
Data convertersA/D 8x10b
Program memory size48KB (48K x 8)

Product details

ARM Cortex-M0 at 45 MHz — what the core speed buys you

The LPC1224FBD64/121151: Runs an ARM Cortex-M0 core at 45 MHz. 55 I/O lines are available.

48 KB Flash, 4 KB RAM — fitting the firmware

48 KB Flash and 4 KB RAM. Internal oscillator trims BOM.

The LPC1224 integrates I²C, SPI, SSI, SSP, UART/USART, IrDA, and Microwire — covering most serial buses found on sensors, memory chips, and wireless modules. The 8-channel 10-bit ADC is adequate for reading potentiometers, thermistors, or current-sense resistors at low update rates.

Frequently asked questions

What is the closest pin-compatible alternative to LPC1224FBD64/121151?

Within the LPC1200 series, the LPC1224FBD64/121151 shares the same 64-LQFP footprint and pinout as other LPC122x variants with different Flash/RAM sizes — the LPC1225 and LPC1226 are density upgrades that drop in without a board spin, though the evidence does not list a specific order code as a validated second source.

Can LPC1224FBD64/121151 be programmed with an SWD debugger?

Yes, the ARM Cortex-M0 core supports Serial Wire Debug (SWD) for programming and debug, using the standard SWDIO and SWCLK pins available on the 64-LQFP package.

What is the LPC1224FBD64/121151 pinout and package drawing?

The LPC1224FBD64/121151 is supplied in a 64-LQFP package with a 10x10 mm body; the pinout follows the standard LPC122x 64-pin assignment, with 55 general-purpose I/O pins and dedicated SWD, serial, and analog pins. A full pinout diagram is in the NXP LPC122x datasheet.