NXP LPC11U13FBD48/201, ARM Cortex-M0 32-bit MCU, 50MHz, 24KB Flash, 6KB RAM, USB 2.0 device, 40 I/O, 1.8V-3.6V, -40°C to 85°C, 48-LQFP.
| Parameter | Value |
|---|---|
| Series | LPC11Uxx |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C ~ 85°C (TA) |
| Speed | 50MHz |
| Package | Tray |
| RAM size | 6K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Connectivity | I²C, Microwire, SmartCard, SPI, SSP, UART/USART, USB |
| Number of i (O) | 40 |
| Core processor | ARM® Cortex®-M0 |
| Case | 48-LQFP |
| Data converters | A/D 8x10b |
| Program memory size | 24KB (24K x 8) |
Forty general-purpose I/O lines are brought out to the 48-LQFP package. On-chip connectivity includes I²C, SPI/SSP, UART/USART, and a SmartCard interface alongside the USB controller. An 8-channel 10-bit ADC handles basic analog sensing. Internal oscillator means no external crystal is required for UART or I²C operation — though USB requires the internal oscillator's accuracy to meet full-speed timing without an external resonator.
No end-of-life notice.
Pin-compatible and same peripheral set, but the LPC11U14FBD48 carries 32 KB Flash versus 24 KB on this part. If your firmware fits in 24 KB, they are drop-in interchangeable. If you need the extra 8 KB for a USB stack or larger application buffer, the LPC11U14 is the correct choice.
Yes — the device includes a USB 2.0 full-speed device controller. It handles HID, CDC, and vendor-class endpoints without an external bridge IC.
1.8 V to 3.6 V supply range. A single 3.3 V rail or a 1.8 V core supply both work — check the ADC reference and I/O voltage compatibility in your design.
ARM Cortex-M0 at 50 MHz, 24 KB Flash, 6 KB RAM, 40 I/O, USB 2.0 device, I²C/SPI/UART/SmartCard, 8-channel 10-bit ADC, internal oscillator, 1.8 V to 3.6 V supply, -40°C to 85°C, 48-LQFP package.