Skip to main content
Murata Electronics LQH43MN121J03L — Inductors & Chokes

Murata LQH43MN121J03L 120 µH Inductor, 150 mA, 1812

MPNLQH43MN121J03L
Active

Murata Electronics LQH43 series, Drum Core Wirewound Inductor, LQH43MN121J03L, 120 µH, 150 mA, 1812 (4532 Metric) SMD.

$0.4500Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LQH43MN121J03L specifications
ParameterValue
TypeDrum Core, Wirewound
SeriesLQH43
MountingSurface Mount
Current rating150 mA
Frequency - self resonant6.2MHz
Inductance frequency - test1 MHz
Operating temperature-40°C ~ 85°C
Material - coreFerrite
Size (Dimension)0.177\" L x 0.126\" W (4.50mm x 3.20mm)
Height - seated0.110\" (2.80mm)
PackageTape & Reel (TR) Cut Tape (CT)
Q @ freq40 @ 796kHz
ShieldingUnshielded
Tolerance±5%
Inductance120 µH
Case1812 (4532 Metric)
DC resistance3Ohm Max

Product details

120 µH unshielded wirewound in 1812

The Murata LQH43MN121J03L is a drum-core wirewound inductor with a nominal inductance of 120 µH at a test frequency of 1 MHz, rated for 150 mA continuous current.

Self-resonant and Q factor

A self-resonant frequency (SRF) of 6.2 MHz means the inductor behaves inductively up to that point; above SRF the impedance turns capacitive, so the part is suited for filtering and DC-DC conversion up to the low-MHz range. The Q factor of 40 at 796 kHz indicates moderate AC losses at that frequency — adequate for general-purpose filtering and decoupling in power supply outputs and signal conditioning where the Q is not the primary selection constraint.

Frequently asked questions

Where can I buy LQH43MN121J03L and how do I get a price?

The LQH43MN121J03L is an active part sourced through independent distribution.

What is the DC resistance of LQH43MN121J03L and why does it matter?

The maximum DCR is 3 Ohm. At the rated 150 mA current, this resistance produces 67.5 mW of heat; the figure is relevant for estimating conduction loss in power supply output filters or DC-DC converter inductors.