Skip to main content
Murata Electronics LQH2MPZ330MGRL — Inductors & Chokes

Murata LQH2MPZ330MGRL 33 µH Shielded Inductor, AEC-Q200

MPNLQH2MPZ330MGRL
Active

Murata Electronics LQH2 series drum core wirewound inductor, shielded, 33 µH ±20%, 200 mA, 5.16 Ohm DCR, AEC-Q200, 0806 (2016 Metric) surface mount.

$0.3300Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LQH2MPZ330MGRL specifications
ParameterValue
TypeDrum Core, Wirewound
SeriesLQH2
MountingSurface Mount
Current rating200 mA
Current - saturation310mA
Frequency - self resonant15MHz
Inductance frequency - test1 MHz
Operating temperature-40°C ~ 105°C
Material - coreFerrite
Size (Dimension)0.079\" L x 0.063\" W (2.00mm x 1.60mm)
Height - seated0.037\" (0.95mm)
PackageTape & Reel (TR) Cut Tape (CT)
RatingsAEC-Q200
ShieldingShielded
Tolerance±20%
Inductance33 µH
Case0806 (2016 Metric)
DC resistance5.16Ohm Max

Product details

33 µH shielded wirewound for automotive power and signal filtering

The Murata LQH2MPZ330MGRL is a 33 µH drum core wirewound inductor from the LQH2 series, shielded to contain magnetic flux and rated for surface-mount assembly in an 0806 (2016 metric) footprint.

Current, DCR, and self-resonant frequency — the selection axes

Rated 200 mA continuous with a saturation current floor of 310 mA — the inductor stays within its linear region up to that point; above it the inductance rolls off sharply. Maximum DC resistance is 5.16 Ohm, which sets the I²R loss at full rated current to roughly 0.2 W — the 0806 body dissipates that without exceeding the 105°C limit in still air. Self-resonant frequency is 15 MHz, tested at 1 MHz — above that the component behaves capacitively, so it is suited for DC-DC converter output filters and low-frequency EMI suppression below 10 MHz.

Shielded construction and 0806 footprint

The ferrite core and shield contain the field lines, reducing crosstalk to adjacent traces and allowing tighter component spacing on the board.

Frequently asked questions

Is LQH2MPZ330MGRL qualified for automotive use?

Yes, it carries AEC-Q200 qualification, the passive-component equivalent of AEC-Q100 for ICs, covering reliability stress testing and temperature cycling for automotive-grade deployment.

What is the inductance tolerance and test frequency?

Inductance is 33 µH ±20%, tested at 1 MHz. The self-resonant frequency is 15 MHz, so the inductor maintains its inductive behavior up to that point.