Skip to main content
Log in
Murata Electronics DFE2MCAH2R2MJ0L — Inductors & Chokes

DFE2MCAH2R2MJ0L Murata Shielded Power Inductor, 2.2 µH

MPNDFE2MCAH2R2MJ0L
Active

Murata Electronics DFE2M series shielded drum core wirewound inductor, DFE2MCAH2R2MJ0L, 2.2 µH ±20%, 1.4 A, 169 mOhm DCR, AEC-Q200, 0806 package.

$0.6400Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DFE2MCAH2R2MJ0L specifications
ParameterValue
TypeDrum Core, Wirewound
SeriesDFE2M
MountingSurface Mount
Current rating1.4 A
Current - saturation1.7A
Inductance frequency - test1 MHz
Operating temperature-40°C~150°C
Material - coreMetal
Size (Dimension)0.079\" L x 0.063\" W (2.00mm x 1.60mm)
Height - seated0.047\" (1.20mm)
PackageTape & Reel (TR); Cut Tape (CT)
RatingsAEC-Q200
ShieldingShielded
Tolerance±20%
Inductance2.2 µH
Case0806 (2016 Metric)
DC resistance169mOhm Max

Product details

Why the 150°C rating and AEC-Q200 matter for this inductor

The Murata DFE2MCAH2R2MJ0L is a shielded wirewound inductor from the DFE2M series, rated for 2.2 µH ±20% with a continuous current of 1.4 A and a saturation current of 1.7 A. The -40°C to 150°C operating range covers the full automotive underhood temperature band, including hot-soak conditions near the engine block.

Package and board-fit: 0806 footprint with 1.2 mm seated height

The shielded construction contains the magnetic flux — adjacent high-impedance traces or sensitive analog circuits are not coupled through stray inductance. Surface-mount termination with Tape & Reel packaging supports automated pick-and-place at high volume. The metal composite core handles the saturation current of 1.7 A without the inductance roll-off typical of ferrite cores at elevated temperature.

Compliance and lifecycle posture

AEC-Q200 qualification is the only formal compliance listing in the spec record.

Frequently asked questions

What is the saturation current of DFE2MCAH2R2MJ0L and why does it matter?

The saturation current (Isat) is 1.7 A. This is the DC current at which the inductance drops by a specified percentage — design the peak current in your buck converter or filter below this value to maintain the 2.2 µH inductance. The continuous current rating (1.4 A) is the thermal limit; the saturation limit is higher, so the inductor is thermally constrained in normal operation.