Skip to main content
Log in
Murata Electronics DFE252012PD-1R5M=P2 — Inductors & Chokes

Murata DFE252012PD-1R5M=P2 Shielded Power Inductor, 1.5 µH

MPNDFE252012PD-1R5M=P2
Active

Murata Electronics DFE252012PD series, Drum Core Wirewound, Shielded, 1.5 µH, ±20%, 2.6 A, 1008 (2520 Metric), Surface Mount, AEC-Q200.

$0.4800Ref. price · indicative, final on quote
Murata Electronics DFE252012PD-1R5M=P2 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DFE252012PD-1R5M=P2 specifications
ParameterValue
TypeDrum Core, Wirewound
SeriesDFE252012PD
MountingSurface Mount
Current rating2.6 A
Current - saturation3.3A
Inductance frequency - test1 MHz
Operating temperature-40°C ~ 125°C
Material - coreIron Powder
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.047\" (1.20mm)
PackageTape & Reel (TR) Cut Tape (CT)
RatingsAEC-Q200
FeaturesFlat Wire
ShieldingShielded
Tolerance±20%
Inductance1.5 µH
Case1008 (2520 Metric)
DC resistance60mOhm Max

Product details

Package and footprint for power-stage layout

The DFE252012PD-1R5M=P2: This low-profile shielded inductor fits tight power-stage layouts where board height is constrained, such as DC-DC converter output filters or point-of-load regulators. The iron-powder core and flat-wire winding construction deliver a saturation current of 3.3 A against a rated current of 2.6 A, giving headroom for transient loads without hard saturation. The 60 mOhm max DCR sets the conduction loss — at 2.6 A the I²R loss is about 0.4 W, which the 1008 footprint must dissipate through the PCB copper.

Frequently asked questions

What is DFE252012PD-1R5M=P2's listed type and series?

It is a Drum Core, Wirewound inductor in the DFE252012PD series. The construction uses an iron-powder core with a flat-wire winding, and it is fully shielded.

What compliance documentation does Murata provide for DFE252012PD-1R5M=P2?

The part is AEC-Q200 qualified for automotive reliability. Murata provides RoHS and REACH compliance documentation through its standard product change notification process. No UL or IEC certification is listed in the product record.