Parametric fit: 1.5 µH shielded wirewound for DC-DC input/output filtering
The DFE252008U-1R5M=P2 is a shielded drum-core wirewound inductor from Murata's DFE252008U series, built with an iron powder core and flat-wire winding to minimize DCR while maintaining saturation headroom. Rated at 1.9 A with a saturation current of 2.7 A, the part provides a 42 % margin between continuous rated current and the onset of inductance roll-off — a useful buffer for DC-DC converter input/output stages where transient peaks can exceed the average load.
Package and board-fit: 1008 (2520) with 0.80 mm seated height
Shielded construction reduces radiated EMI coupling into adjacent traces, which matters when the inductor sits near a sensitive analog front-end or RF section on the same board.
Sourcing and supply posture
For BOM risk management, qualify the alternate now if the line cannot tolerate sole-source exposure.