Shielded power inductor for DC-DC converter rails
The Murata DFE252008C-1R5M=P2 is a shielded drum-core wirewound inductor in the DFE252008C series, built with a flat-wire winding on an iron powder core. Rated at 1.5 µH ±20% with a continuous current of 1.2 A and a saturation current of 2 A, it fits power-supply rails where the DC bias current stays under the saturation knee.
1008 footprint and board-fit details
Shielded construction reduces radiated EMI into adjacent traces — useful when the inductor sits near a sensitive analog or RF section on the same layer. Surface-mount termination with tape-and-reel packaging supports automated pick-and-place assembly; the flat-wire winding lowers AC losses at switching frequencies above 1 MHz.