1 µH shielded power inductor in 0806
The Murata DFE201612E-1R0M=P2 is a shielded wirewound drum-core inductor in the DFE201612E series, delivering 1 µH ±20% in an 0806 (2016 Metric) surface-mount package. Rated at 2.9 A continuous with a saturation current of 4 A, the part handles moderate dc bias without a steep inductance roll-off — the saturation headroom means the inductor stays in its linear region under most load steps.
Footprint and board-fit constraints
Shielded construction and a metal composite core reduce radiated EMI compared to unshielded ferrite drums, which matters when the inductor sits near sensitive analog or RF stages on the same board. Available on tape-and-reel or cut-tape, the part is compatible with standard pick-and-place equipment; the 0806 case size is a common feeder setup.
Sourcing and compliance posture
Inductance is tested at 1 MHz, which is the standard test frequency for 1 µH-class power inductors. The ±20% tolerance band covers the full temperature range and dc-bias variation.