Precision op-amp for low-frequency signal conditioning
The Maxim Integrated OP07DP+ is a single-channel, general-purpose operational amplifier in an 8-pin DIP through-hole package. It delivers a gain-bandwidth product of 600 kHz and a slew rate of 0.3 V/µs — figures that place it squarely in the precision, low-bandwidth class. The 60 µV maximum input offset voltage is the headline spec: it defines the DC error floor for the design, making this part a natural fit for sensor front-ends, bridge amplifiers, and other circuits where microvolt-level accuracy matters more than speed. The commercial temperature range (0°C to 70°C) confines it to indoor, controlled environments — benchtop instruments, lab equipment, or office peripherals. The supply span is fixed at 44 V maximum, so plan the rail accordingly.
Package and mounting
The OP07DP+ comes in an 8-pin DIP (0.300" body width, 7.62 mm pitch) and is specified for through-hole mounting. The supplier device package is 8-PDIP. The listed packaging is Bulk — meaning it ships in tubes or loose quantity, not on tape-and-reel. That is fine for bench builds, prototyping, and low-volume production, but if your pick-and-place line expects reeled parts, factor in a hand-load step or look for a surface-mount variant.