Skip to main content
Analog Devices MXL1535EEWI+T — Discrete Semiconductors
Analog Devices

MXL1535EEWI+T Transceiver, RS422/RS485, 1Mbps, 28-SOIC

MPNMXL1535EEWI+T
End of Life

Maxim Integrated MXL1535EEWI+T, RS422/RS485 Transceiver, Full Duplex, 1/1 Drivers/Receivers, 1Mbps, 3V to 5.5V, -40°C to 85°C, 28-SOIC.

$17.48Ref. price · indicative, final on quote
MXL1535EEWI+T datasheet
Packaging28-SOIC (0.295", 7.50mm Width), 16 Leads
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MXL1535EEWI+T Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeSurface Mount
Voltage3V ~ 5.5V
ProtocolRS422, RS485
Operating temperature-40°C ~ 85°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate1Mbps
Case28-SOIC (0.295\", 7.50mm Width), 16 Leads
Receiver hysteresis30 mV
Number of drivers (Receivers)1/1

Product details

The MXL1535EEWI+T is a full-duplex RS422/RS485 transceiver in a 28-SOIC package. It handles one driver and one receiver, running at 1 Mbps over -40°C to 85°C.

Package and footprint

The 28-SOIC (0.295", 7.50 mm width) body is a standard wide-body SOIC footprint. The 16-lead count inside the 28-pin body is unusual — verify the land pattern against your layout; the pinout is not the typical 8-pin SOIC RS485. Surface-mount only, no through-hole option.

Lifecycle and sourcing

No end-of-life notice on record. For a BOM freeze or a new design, this part carries no obsolescence risk today.

Frequently asked questions

Is MXL1535EEWI+T compatible with 5V logic?

Yes, the supply range of 3V to 5.5V covers both 3.3V and 5V rails directly. No level translator is needed when interfacing with a 5V UART or controller.

What is the difference between RS485 and RS422?

RS422 is a point-to-point or multi-drop protocol with one driver and up to 10 receivers on a single pair; RS485 supports multi-point with up to 32 unit loads and allows multiple drivers on the same bus. The MXL1535EEWI+T supports both protocols, so you can use it in either topology.