Skip to main content
Analog Devices MAX9923FEUB+ — DC-DC Power Modules
Analog Devices

MAX9923FEUB+ Current Sense Amplifier, 0.4V/µs Slew Rate

MPNMAX9923FEUB+
End of Life

Analog Devices MAX9923FEUB+, Current Sense Amplifier, 1 Circuit, 0.4V/µs Slew Rate, 2.5 kHz Bandwidth, 2.85V to 5.5V Supply, 10-uMAX/uSOP, -40°C to 85°C.

$5.33Ref. price · indicative, final on quote
MAX9923FEUB+ datasheet
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX9923FEUB+ Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeCurrent Sense
Voltage - input offset0.1 µV
Voltage - supply span2.85 V
Current - supply780µA
Current - input bias1 pA
Operating temperature-40°C ~ 85°C
-3db bandwidth2.5 kHz
PackageTube
Slew rate0.4V/µs
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Number of circuits1

Product details

Current sense amplifier for precision low-side/high-side monitoring

The MAX9923FEUB+ is a single current sense amplifier with 0.1 µV input offset voltage, 0.4 V/µs slew rate, and 2.5 kHz bandwidth, operating from -40°C to 85°C.

780 µA supply current — fits always-on and battery-powered rails

Supply current is 780 µA from a 2.85 V to 5.5 V supply. Input bias current is 1 pA.

Package and footprint — 10-uMAX/uSOP, surface mount

Housed in a 10-pin TFSOP/MSOP package (3.00 mm body width), the MAX9923FEUB+ is a surface-mount device supplied in tube form. The supplier device package is designated 10-uMAX/uSOP. Board layout matches the standard MSOP-10 footprint; no thermal pad is required given the 780 µA dissipation.

Lifecycle and compliance — active production, ROHS3

This part carries an active lifecycle status with ROHS3 compliance.

Frequently asked questions

What is MAX9923FEUB+'s listed slew rate?

The slew rate is 0.4 V/µs, which limits the amplifier's ability to track fast current transients. For DC or low-frequency monitoring this is adequate; for sub-millisecond fault detection a higher-slew device would be needed.