Skip to main content
Analog Devices MAX9917EUB+ — Discrete Semiconductors
Analog Devices

MAX9917EUB+ General Purpose Op-Amp, 1 MHz GBW

MPNMAX9917EUB+
End of Life

Analog Devices MAX9917EUB+, dual general-purpose op-amp, 1 MHz gain bandwidth, 0.5 V/µs slew rate, rail-to-rail output, 40 µA supply per channel, 1.8 V to 5.5 V supply, -40°C to 85°C, 10-uMAX/uSOP package.

$2.65Ref. price · indicative, final on quote
MAX9917EUB+ datasheet
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX9917EUB+ Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset200 µV
Voltage - supply span5.5 V
Current - supply40µA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)15 mA
Operating temperature-40°C ~ 85°C
Gain bandwidth product1 MHz
PackageTube
Slew rate0.5V/µs
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

Dual op-amp for tight power budgets and low-frequency signal chains

The MAX9917EUB+ from Analog Devices is a dual general-purpose operational amplifier in a compact 10-uMAX/uSOP package. It delivers a 1 MHz gain-bandwidth product and a 0.5 V/µs slew rate — numbers that place it squarely in the low-frequency precision camp, not high-speed video or RF. The rail-to-rail output stage lets it swing within millivolts of either supply rail, which matters when you are running from a single 1.8 V rail and need every bit of ADC input range. Operating temperature spans -40°C to 85°C. Supply range is 1.8 V to 5.5 V.

Rail-to-rail output — what it buys you at low supply

Rail-to-rail output lets the amplifier swing within millivolts of the supply rails. Output can source or sink 15 mA per channel.

Frequently asked questions

What is the quiescent current of MAX9917EUB+?

The supply current is 40 µA per channel, so 80 µA total for the dual amplifier.

What is the pinout of MAX9917EUB+?

The pinout follows the standard dual op-amp pinout for the 10-pin uMAX/uSOP package: pin 1 is output A, pin 2 is inverting input A, pin 3 is non-inverting input A, pin 4 is V+, pin 5 is non-inverting input B, pin 6 is inverting input B, pin 7 is output B, pin 8 is V-, pin 9 and 10 are not connected. The supplier device package is 10-uMAX/uSOP.