Skip to main content
Analog Devices MAX986EUK+T — Analog & Data Acquisition

MAX986EUK+T Analog Devices Comparator, 450ns, SOT-23-5

MPNMAX986EUK+T
End of Life

Analog Devices MAX986EUK+T general-purpose comparator, single element, CMOS/open-drain/rail-to-rail/TTL output, 450ns propagation delay, SOT-23-5 package, tape and reel.

$4.23Ref. price · indicative, final on quote
PackagingSC-74A, SOT-753
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX986EUK+T Technical Specifications
ParameterValue
TypeGeneral Purpose
Output typeCMOS, Open-Drain, Rail-to-Rail, TTL
Mounting typeSurface Mount
Voltage - input offset5mV @ 5.5V
Voltage - supply, single (Dual (±))2.5V ~ 5.5V, ±1.25V ~ 2.75V
Current - quiescent24µA
Current - input bias1pA @ 5.5V
Operating temperature-40°C ~ 85°C
PackageTape & Reel (TR); Cut Tape (CT)
Hysteresis±3mV
CaseSC-74A, SOT-753
CMRR, PSRR80dB CMRR, 80dB PSRR
Number of elements1
Propagation delay450ns

Product details

Single comparator with flexible output and fast 450ns response

The MAX986EUK+T is a single general-purpose comparator from Analog Devices, offered in a compact SOT-23-5 package. It delivers a 450ns max propagation delay, making it suitable for level detection, zero-crossing detectors, and window comparators where response time matters. The output stage supports CMOS, open-drain, rail-to-rail, and TTL logic levels, so it interfaces directly with 2.5V to 5.5V logic without an external level shifter. The open-drain option lets multiple comparators share a pull-up for wired-OR configurations.

Supply range, quiescent draw, and temperature grade

Operating from a single 2.5V to 5.5V supply (or dual ±1.25V to ±2.75V), the MAX986EUK+T fits into both single-rail and split-rail designs. Quiescent current is 24µA max, which keeps the power budget tight in battery-powered sensor interfaces. Input bias current is 1pA max at 5.5V, so high-impedance sources like photodiode amplifiers or pH probes see negligible loading. With ±3mV typical hysteresis, the comparator avoids output chatter near the threshold — useful for noisy environments like motor-drive current sensing or switch-debounce circuits.

CMRR, PSRR, and offset — what they mean for the BOM

Typical CMRR and PSRR are both 80dB. That means common-mode noise on the input pair or ripple on the supply rail is attenuated by a factor of 10,000 — the comparator sees the differential signal, not the supply bounce. In a 12-bit ADC driver or a precision threshold detector, this keeps the trip point stable. Maximum input offset voltage is 5mV at 5.5V. For a 100mV reference threshold, that is a 5% error before any temperature drift — budget this into the trip-point tolerance if the application does not allow trimming.

Active production and compliance documentation

It is ROHS3 compliant, so it meets the current EU restriction on hazardous substances without an exemption. No pin-compatible alternative is recorded on this line — the part is the current production choice for this specification.

Frequently asked questions

What is the propagation delay of the MAX986EUK+T?

The maximum propagation delay is 450ns. This sets the upper limit on the comparator's response time from input crossing to output transition.

What output types does the MAX986EUK+T support?

It supports CMOS, open-drain, rail-to-rail, and TTL output levels. The open-drain option allows multiple comparators to share a single pull-up resistor for wired-OR logic.