Skip to main content
Analog Devices MAX9611AUB+ — Signal Isolation
Analog Devices

MAX9611AUB+ Current Sense Amplifier, 4 MHz Bandwidth

MPNMAX9611AUB+
End of Life

Analog Devices MAX9611AUB+ current sense amplifier, single circuit, 4 MHz -3dB bandwidth, 2.5 MHz gain-bandwidth product, 1.6 mA supply, 100 µV input offset, 1 µA input bias, 15 mA output per channel, 2.7 V to 5.5 V supply, -40 to 125°C, 10-uMAX/uSOP package, surface mount, tube.

$5.54Ref. price · indicative, final on quote
MAX9611AUB+ datasheet
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX9611AUB+ Technical Specifications
ParameterValue
Mounting typeSurface Mount
Amplifier typeCurrent Sense
Voltage - input offset100 µV
Voltage - supply span5.5 V
Current - supply1.6mA
Current - input bias1 µA
Current - output (Channel)15 mA
Operating temperature-40°C ~ 125°C
-3db bandwidth4 MHz
Gain bandwidth product2.5 MHz
PackageTube
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Number of circuits1

Product details

What this current sense amp does on your board

The MAX9611AUB+ is a single-channel current sense amplifier from Analog Devices, built to monitor shunt voltage on high-side or low-side rails. It has a 4 MHz -3dB bandwidth and a 2.5 MHz gain-bandwidth product. Supply span runs from 2.7 V to 5.5 V. The 1.6 mA supply current is moderate. Input offset voltage is trimmed to 100 µV, and input bias current runs 1 µA. Output can source or sink 15 mA per channel. Temperature range is -40°C to 125°C.

Package and mounting — what you need for assembly

Housed in a 10-uMAX/uSOP package (3.00 mm wide, 0.118" pitch), surface-mount only. The supplier device package is 10-uMAX/uSOP. It ships in a tube, not tape-and-reel.

Frequently asked questions

What package type is the MAX9611AUB+?

The MAX9611AUB+ comes in a 10-uMAX/uSOP package (3.00 mm width, 0.118" pitch), surface mount, shipped in a tube.

Can I buy the MAX9611AUB+ in tape and reel?

The listed packaging for this order code is tube. Tape-and-reel may be available under a different suffix (e.g., MAX9611AUB+T). Confirm with your distributor before ordering if reel feed is required for your assembly line.