What the 1 x 2:2 configuration means for your signal routing
The MAX9152EUE+ is a single-supply crosspoint switch from Analog Devices, configured as 1 independent circuit with a 1 x 2:2 topology — one input can be routed to two outputs, or two inputs can be directed to two outputs in a non-blocking arrangement. This makes it suitable for multiplexing LVDS or low-voltage digital signals in backplane, test equipment, or video routing applications where signal integrity matters at the board level.
Supply and temperature: design-in constraints
Operates from a single 3V to 3.6V rail — the 3.3V nominal supply is the obvious fit, but the 300 mV tolerance means a 3.0V or 3.6V rail also works without a secondary regulator.
Package and board-fit: 16-TSSOP specifics
Housed in a 16-TSSOP (4.40 mm width) with a 0.65 mm pitch — the footprint is standard for this package class, and the 16-TSSOP supplier device package matches the case code for land-pattern reuse across multiple ADI crosspoint parts. Supplied in tube format; the surface-mount package is compatible with reflow soldering profiles typical for TSSOP assemblies.
Fully RoHS3 compliant, which covers the current EU exemption scope without requiring a waiver or special handling for lead-free assembly.