Skip to main content
Analog Devices MAX892LEUA+T — Discrete Semiconductors
Analog Devices

MAX892LEUA+T Analog Devices Power Switch, 250mA, 8-uMAX

MPNMAX892LEUA+T
End of Life

Analog Devices MAX892LEUA+T, general-purpose high-side power switch, P-channel, 1 output, 250mA max, 250mOhm Rds(on), 2.7V-5.5V load, 8-uMAX/uSOP, Tape & Reel.

$4.36Ref. price · indicative, final on quote
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX892LEUA+T Technical Specifications
ParameterValue
Input typeNon-Inverting
Output typeP-Channel
Switch typeGeneral Purpose
Mounting typeSurface Mount
Voltage - load2.7V ~ 5.5V
Voltage - supply (Vcc (Vdd))Not Required
Current - output250mA
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesStatus Flag
Rds on250mOhm
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Fault protectionCurrent Limiting (Adjustable), Over Temperature
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

250mA high-side switch with status flag and adjustable current limit

The MAX892LEUA+T is a single-channel P-channel high-side power switch from Analog Devices, rated for 250mA continuous output current with a typical on-resistance of 250mOhm. The load voltage range spans 2.7V to 5.5V, covering common 3.3V and 5V rails in portable and embedded systems. Fault protection includes an adjustable current limit and overtemperature shutdown. A status flag output (open-drain, active-low) asserts when the switch enters current-limit or thermal-shutdown, giving the host controller a direct indication of overcurrent or overtemperature events. The On/Off interface is non-inverting with a 1:1 input-to-output ratio — logic high on the EN pin turns the switch on. No external Vcc supply is needed; the switch is self-powered from the load rail.

Offered in an 8-TSSOP/8-MSOP (0.118", 3.00mm Width) package, also designated as the 8-uMAX/uSOP supplier device package.

Active lifecycle and compliance documentation

ROHS3 compliant per the manufacturer. No pin-compatible second-source or successor is listed on the manufacturer's cross-reference.

Frequently asked questions

What is the maximum output current of the MAX892LEUA+T?

The MAX892LEUA+T is rated for 250mA continuous output current. The current limit is adjustable via an external resistor, allowing the designer to set the threshold below the 250mA maximum for the specific load.

What package options are available for the MAX892LEUA+T?

The part is offered in an 8-TSSOP/8-MSOP package (3.00mm body width) and is also designated as the 8-uMAX/uSOP supplier device package.

Does the MAX892LEUA+T have a status flag output?

Yes, the MAX892LEUA+T includes a status flag output that asserts low when the switch enters current-limit or overtemperature shutdown. This open-drain output can be pulled up to the host logic rail for fault monitoring.