Skip to main content
Analog Devices MAX825MEUK+T — Discrete Semiconductors
Analog Devices

MAX825MEUK+T Simple Reset/Power-On Reset, 4.38V Threshold

MPNMAX825MEUK+T
End of Life

Analog Devices MAX825MEUK+T, Simple Reset/Power-On Reset, 1 Channel, Active High/Active Low, Push-Pull, 140ms Minimum Reset Timeout, 4.38V Threshold, SOT-23-5, -40°C to +125°C.

$5.17Ref. price · indicative, final on quote
MAX825MEUK+T datasheet
PackagingSC-74A, SOT-753
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX825MEUK+T Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeSurface Mount
Voltage - threshold4.38V
Number of voltages monitored1
Operating temperature-40°C ~ 125°C (TA)
ResetActive High/Active Low
OutputPush-Pull, Totem Pole
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout140ms Minimum
CaseSC-74A, SOT-753

Product details

Temperature range and where it runs

Rated for -40°C to 125°C ambient, this supervisor handles the thermal extremes you see in outdoor telecom cabinets, engine-bay electronics, and factory-floor PLC I/O modules. The SOT-23-5 package is small enough to tuck next to the processor without eating board space.

Lifecycle and sourcing reality

The MAX825MEUK+T carries an Active lifecycle status and is ROHS3 compliant. For a BOM freeze or a new design, this part is a safe call — no LTB risk, no last-time-buy scramble.

Frequently asked questions

Does MAX825MEUK+T have push-pull output?

Yes, the output is push-pull (totem pole).

What is the reset timeout of MAX825MEUK+T?

The reset timeout is 140ms minimum. After the monitored voltage rises above the threshold, the reset output stays active for at least 140ms to allow the system to stabilize.