Skip to main content
Analog Devices MAX808LCPA+ — Power Management (PMIC / Gate Driver)
Analog Devices

MAX808LCPA+ Battery Backup Circuit, 4.675V Threshold, 8-DIP

MPNMAX808LCPA+
End of Life

Maxim Integrated MAX808LCPA+ Battery Backup Circuit, Active Low Reset, 140ms Minimum Reset Timeout, 4.675V Threshold, 8-DIP (0.300", 7.62mm) Package, Through Hole, Tube.

$12.92Ref. price · indicative, final on quote
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX808LCPA+ Technical Specifications
ParameterValue
TypeBattery Backup Circuit
Mounting typeThrough Hole
Voltage - threshold4.675V
Number of voltages monitored1
Operating temperature0°C ~ 70°C (TA)
ResetActive Low
PackageTube
Reset timeout140ms Minimum
Case8-DIP (0.300\", 7.62mm)

Product details

Battery backup supervisor with a tight threshold window

The MAX808LCPA+: Housed in an 8-pin PDIP (0.300" wide, 7.62mm pitch) with through-hole mounting, it suits legacy or low-volume designs where a socketed or hand-soldered DIP package is preferred over surface-mount.

The 4.675V threshold is set for a 5V nominal supply rail — it triggers a reset when the rail drops roughly 6.5% below 5V, which is tight enough to catch a brownout before the downstream logic enters an undefined state. The 140ms minimum reset timeout gives the power supply time to recover from a transient sag without cycling the system, while being short enough that a full power-on reset completes within a typical microcontroller's startup window.