Skip to main content
Analog Devices MAX706TEUA+T — Discrete Semiconductors
Analog Devices

MAX706TEUA+T Simple Reset/Power-On Reset, 3.08V Threshold

MPNMAX706TEUA+T
End of Life

Analog Devices MAX706TEUA+T, Simple Reset/Power-On Reset supervisor, 1 channel, active-low reset, push-pull output, 3.08V threshold, 140ms minimum reset timeout, -40°C to 85°C, 8-uMAX/uSOP package.

$10.26Ref. price · indicative, final on quote
MAX706TEUA+T datasheet
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX706TEUA+T Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeSurface Mount
Voltage - threshold3.08V
Number of voltages monitored1
Operating temperature-40°C ~ 85°C (TA)
ResetActive Low
OutputPush-Pull, Totem Pole
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout140ms Minimum
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)

Product details

What this supervisor does for your 3.3 V rail

The MAX706TEUA+T is a single-channel simple reset/power-on reset supervisor from Analog Devices. It monitors a single supply rail and asserts an active-low, push-pull reset output when the voltage drops below the 3.08 V threshold.

Package and temperature grade

Housed in an 8-uMAX/uSOP package (3.00 mm body width), surface-mount only. The -40°C to 85°C industrial temperature range covers most factory-floor, outdoor telecom, and motor-drive enclosures.

Frequently asked questions

What is the difference between MAX706TEUA+T and MAX706SEUA+T?

The primary difference is the reset threshold voltage. The MAX706TEUA+T monitors at 3.08 V (for 3.3 V rails), while the MAX706SEUA+T uses a different threshold — typically 2.93 V for 3.0 V rails. Both are single-channel simple reset supervisors with the same package and pinout. Choose the threshold that matches your supply rail.

What is MAX706TEUA+T's reset output type?

The reset output is active-low, push-pull (totem pole). No external pull-up resistor is needed. The output drives high when the supply is above the threshold and pulls low during reset.

What is the reset timeout of MAX706TEUA+T?

The reset timeout is a minimum of 140 ms. After the supply rises above the 3.08 V threshold, the reset output stays low for at least 140 ms before releasing, ensuring the processor has time to initialize.