Skip to main content
Analog Devices MAX706ARESA+ — Power Management (PMIC / Gate Driver)
Analog Devices

MAX706ARESA+ Analog Devices Supervisor IC, 2.63V Threshold

MPNMAX706ARESA+
End of Life

Analog Devices MAX706ARESA+ Simple Reset/Power-On Reset IC, Active Low, Push-Pull Output, 2.63V Threshold, 140ms Timeout, 8-SOIC, -40°C to 85°C.

$9.95Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX706ARESA+ Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeSurface Mount
Voltage - threshold2.63V
Number of voltages monitored1
Operating temperature-40°C ~ 85°C (TA)
ResetActive Low
OutputPush-Pull, Totem Pole
PackageTube
Reset timeout140ms Minimum
Case8-SOIC (0.154\", 3.90mm Width)

Product details

What does the 2.63V threshold actually mean for your rail?

The MAX706ARESA+: That threshold is the trip point where the downstream logic — typically a microcontroller, FPGA, or SoC — is no longer guaranteed to operate correctly.

Active-low push-pull output — why that matters for your bus

That means it drives the reset line high or low without needing an external pull-up resistor — the output stage sources current when deasserted and sinks it when asserted. For a microcontroller with a dedicated /RESET pin, this eliminates the pull-up resistor on the board and gives a clean, fast edge into the reset input.

Frequently asked questions

What is the reset timeout on the MAX706ARESA+?

The reset timeout is a minimum of 140ms. After the monitored voltage rises above the 2.63V threshold, the reset output stays low for at least 140ms before releasing, giving the system time to stabilize.